Publikation

Measurements of isocenter path characteristics of the gantry rotation axis with a smartphone application

Wissenschaftlicher Artikel/Review - 08.03.2015

Bereiche
PubMed
DOI
Kontakt

Zitation
Schiefer J, Ingulfsen N, Kluckert J, Peters S, Plasswilm L. Measurements of isocenter path characteristics of the gantry rotation axis with a smartphone application. Med Phys 2015; 42:1184-92.
Art
Wissenschaftlicher Artikel/Review (Englisch)
Zeitschrift
Med Phys 2015; 42
Veröffentlichungsdatum
08.03.2015
ISSN (Druck)
0094-2405
Seiten
1184-92
Kurzbeschreibung/Zielsetzung

PURPOSE
For stereotactic radiosurgery, the AAPM Report No. 54 [AAPM Task Group 42 (AAPM, 1995)] requires the overall stability of the isocenter (couch, gantry, and collimator) to be within a 1 mm radius. In reality, a rotating system has no rigid axis and thus no isocenter point which is fixed in space. As a consequence, the isocenter concept is reviewed here. It is the aim to develop a measurement method following the revised definitions.

METHODS
The mechanical isocenter is defined here by the point which rotates on the shortest path in the room coordinate system. The path is labeled as "isocenter path." Its center of gravity is assumed to be the mechanical isocenter. Following this definition, an image-based and radiation-free measurement method was developed. Multiple marker pairs in a plane perpendicular to the assumed gantry rotation axis of a linear accelerator are imaged with a smartphone application from several rotation angles. Each marker pair represents an independent measuring system. The room coordinates of the isocenter path and the mechanical isocenter are calculated based on the marker coordinates. The presented measurement method is by this means strictly focused on the mechanical isocenter.

RESULTS
The measurement result is available virtually immediately following completion of measurement. When 12 independent measurement systems are evaluated, the standard deviations of the isocenter path points and mechanical isocenter coordinates are 0.02 and 0.002 mm, respectively.

CONCLUSIONS
The measurement is highly accurate, time efficient, and simple to adapt. It is therefore suitable for regular checks of the mechanical isocenter characteristics of the gantry and collimator rotation axis. When the isocenter path is reproducible and its extent is in the range of the needed geometrical accuracy, it should be taken into account in the planning process. This is especially true for stereotactic treatments and radiosurgery.